3. Click OK to run the self-calibration.
Related Information
Refer to the NI RF Vector Signal Transceivers Help for more information about self-
calibration and self-calibrating programatically.
Locating the Software and Examples
Software Locations
Table 6. Location of PXIe-5841 Software Options
Software
Option
ADE Location
RFmx LabVIEW Available on the LabVIEW Functions palette at
Measurement I/O»NI-RFmx.
LabWindows/CVI RFmx functions are available from the
LabWindows/CVI Library menu at Library»RFmx
SpecAn Library and Library»RFmx Demod
Library.
Microsoft Visual C/C++ Use the header files located in the <NIDir>\Shared
\ExternalCompilerSupport\C\include
directory and import library files located in one of the
following directories:
• 32-bit installation—<NIDir>\Shared
\ExternalCompilerSupport\C
\lib32\msvc
• 64-bit installation—<NIDir>\Shared
\ExternalCompilerSupport\C
\lib64\msvc
where <NIDir> is the following location:
Program Files (x86)\National
Instruments
Microsoft .NET For the location of .NET class libraries, refer to the
installed RFmx readme.
PXIe-5841 Getting Started Guide | © National Instruments | 13
To Next Page
Loading...
