National Instruments USB-9233 - User Manual

USER GUIDE AND SPECIFICATIONS
NI USB-9233
4-Channel, ±5 V, 24-Bit IEPE Analog Input Device
This user guide describes how to use the National Instruments USB-9233
and lists the device specifications.
Introduction
The NI USB-9233 data acquisition device provides a USB interface for
four channels of 24-bit analog inputs with integrated signal conditioning.
The NI USB-9233 consists of two components: an NI 9233 module and an
NI USB-9162 carrier, as shown in Figure 1.
Figure 1. NI USB-9233 Components
NI 9233
NI USB-9162
NI USB-9233
HI-Speed USB Carrier
N
I
U
SB-9162
Hi-Speed USB Carrier
N
I
U
SB-9162

National Instruments USB-9233 Specifications

General

Product Name	USB-9233
Manufacturer	National Instruments
Category	I/O Systems
Number of Channels	4
Resolution	24 bits
Signal Conditioning	Yes
IEPE signal conditioning	Yes
Connector Type	BNC
Connectivity	USB
Input impedance	1 MΩ
Input Range	±5 V
Operating Temperature	0 °C to 55 °C
Power Requirements	Powered via USB