1. Hold the DECK button.
The two Deck Assign buttons A and C of the left Deck side light brightly.
2. Press one of the dimly lit Deck Assign buttons B or D to switch to the right Deck side.
These buttons will light brightly.
3. Release the DECK button.
→
You have successfully assigned the D2 to control Decks B and D.
The TRAKTOR KONTROL D2 system is now ready for use. For further information on browsing,
loading, and playing tracks please refer to the TRAKTOR KONTROL D2 Manual.
Hardware Installation
Final Preparations
TRAKTOR KNOTRL D2 - Setup Guide - 40
To Next Page
Loading...
