User Manual, neoBLUE
®
compact, English 3
P/N 061083 Rev A
On/Standby Switch
When in the standby position, line voltages are still present inside the device
if the device is plugged in, but no DC voltage is being switched to the LED
panel, fans or timer.
Accessories
The following accessories are included with each light: a USB Flash Drive
containing the User Manual and Service Manual and a power cord.
Arm (optional)
The neoBLUE compact Arm is designed to attach to poles with 0.75 to 1.5
inch (1.91 to 3.81 cm) diameters.
Rollstand (optional)
The neoBLUE compact Rollstand is designed to hold the neoBLUE compact
light and Arm with a base designed to accommodate the weight distribution of
the light enclosure at any height or angle.
To Next Page
Loading...
