Need help?Do you have a question about the natus neoBLUE LED Phototherapy Radiometer and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Wavelength | 450-470 nm |
| Light Source | LED |
| Accuracy | ±5% |
| Measurement Range (Spectral) | 0 to 30 mW/cm² |
| Type | LED Phototherapy Radiometer |
Explains manual conventions like NOTE, CAUTION, and WARNING for clarity and safety.
Defines symbols used on the Radiometer and packaging for easy identification.
Specifies the device's purpose: measuring irradiance of neoBLUE LED phototherapy devices only.
Details the Radiometer's components, measurement units, and spectral band.
Illustrates the device's spectral response relative to bilirubin absorption.
Instructions on how to properly connect the sensor to the Radiometer readout.
Guidance on safely removing the sensor from the Radiometer readout.
Steps to confirm calibration, sensor connection, and device functionality before each use.
Procedures for measuring overhead lights and the neoBLUE cozy light.
Details common display messages and troubleshooting steps.
Instructions for cleaning the Radiometer following infection control procedures.
Step-by-step guide to replacing the 9-volt battery.
Explains factory calibration and the requirement for annual recalibration.
States the device has no customer serviceable parts and must be returned for repairs.
Instructions for returning the device for calibration or service.
Contact information for ordering parts and support inquiries.
To Next Page