Page 1 of 6
English
Nicolet EDX Analog Output Box and Cable
Instructions for Use:
Natus Neurology Incorporated
3150 Pleasant View Road
Middleton, Wisconsin 53562 USA
Tel: +1 608-829-8500
Website: natus.com
EU Representative / Importer
Natus Manufacturing Limited
IDA Business Park
Gort, Co. Galway, Ireland
Associated Product Part Number:
515-020300
Copyright © 2021 by Natus Medical Incorporated. All Rights Reserved. All product names appearing on
this document are trademarks or registered trademarks owned, licensed to, promoted or distributed by
Natus Medical Incorporated, its subsidiaries or affiliates.
CaviWipes is a trademark of Metrex Research, LLC. Sani-Cloth is a registered trademark of PDI, Inc.
Description:
The Nicolet EDX Analog Outbox Box and Cable connects to the Nicolet EDX base unit to allow for additional
analysis through an external data acquisition system. Up to 8 channels of live, continuous analog data
output can be sent to the external device.
The 60in (1.5m) Interface Cable between Analog Output Box and the EDX base unit has 15-pin D type plug
connectors on both ends. The Analog Output Box utilizes 8 BNC connectors to interface with external
equipment.
Intended Use:
The Analog Output Box and Cable provides up to 8 channels of analog data to an external device.
To Next Page
Need help?
General
