Need help?Do you have a question about the Nautel GV40 and is the answer not in the manual?
Provides contact details for customer service, including phone numbers for Canada/USA and international.
Procedures for identifying and correcting transmitter defects during operation.
Precautions for handling static-sensitive semiconductor devices.
How to identify and interpret alarms via status page or front panel.
Guides on accessing internal components of the transmitter.
General advice and steps for troubleshooting common issues.
Lists procedures for replacing modules, PWBs, and cooling fans.
Process for identifying and validating defective RF power modules by checking front panel LEDs.
Discusses permissible transmitter operation with defective or missing RF power modules.
Validating power supply or LVPS modules by checking front panel LEDs and their states.
Details transmitter operation with defective or missing LVPS or power supply modules.
Depicts the family tree for the equipment, identifying assemblies with Nautel configuration control numbers.
Explains how to locate part information using assigned reference designation and Nautel nomenclature.
Wiring lists provided in tabular format, detailing non-printed wiring patterns.
Provides connector mating tables where applicable, corresponding to wiring lists.
Defines default values for capacitors, resistors, and unidentified diodes/suppressors.
Explains graphic symbols used on electrical schematics and logic diagrams per ANSI standards.
Explains how reference designations are assigned according to ASME Y14.44-2008.
Guides on finding schematic diagrams for functional blocks using family trees and tables.
Explains how mechanical drawings are identified by numbers prefixed with MD.
Mechanical drawings illustrate component locations and assembly outlines with dimensional information.
Guides on locating parts on mechanical drawings using reference designations and family trees.
Advanced User Interface - local touch screen and remote feature for transmitter control and monitoring.
Voltage Standing Wave Ratio - expresses reverse to forward voltage ratio on feedline/antenna.
General| Output Power | 40 kW |
|---|---|
| Modulation Types | FM |
| Input Frequency | 50/60 Hz |
| Transmitter Type | Solid State |
| Frequency Range | 88 to 108 MHz |
| Efficiency | 72% |
To Next Page
