S
sjonesAug 8, 2025
How to fix dirty or ineffective air filters in Nautel V3.5?
- JJames ColemanAug 9, 2025
Inspect your air filters at least twice a year. If needed, replace them using Nautel Part # HAM65 or an equivalent.
To Next PageTo Next PageHow to fix dirty or ineffective air filters in Nautel V3.5?
Inspect your air filters at least twice a year. If needed, replace them using Nautel Part # HAM65 or an equivalent.
What to do if the Nautel V3.5 Transmitter backup battery is low?
Replace the battery at least once a year or whenever the front panel GUI displays a 'Backup Battery Low' message.
How to clean a dirty Nautel V3.5 Transmitter?
Clean the transmitter once a year. Use a vacuum cleaner and a soft bristle brush to remove loose dirt. For dirt that cannot be vacuumed, use clean, damp rags.
What does a colour change on Nautel V3.5 Transmitter hardware indicate?
A mounting surface or terminal that has changed colour indicates a loose hardware connection.
What should I do with multi-stranded cables on terminal strips in Nautel V3.5?
Multi-stranded cables installed on terminal strips must be re-torqued.
Information on Nautel's after-sales support, technical assistance, and repair services.
Guidelines for preparing the installation site, including room, clearances, and environmental factors.
Essential lightning protection measures and station reference grounding requirements.
Specifications and requirements for the AC power source, including surge protection.
Procedures for emergency shutdown and the function of external safety interlocks.
How to use the diagnostic display (GUI) for monitoring, control, and troubleshooting.
Procedures for verifying the functionality of remote control features.
Methods for analyzing faults using the system diagram and GUI alarms.
General| Brand | Nautel |
|---|---|
| Model | V3.5 |
| Category | Transmitter |
| Language | English |
