To Next PageTo Next Page
Need help?Do you have a question about the Nautel XL12 and is the answer not in the manual?
General| Power Output | 12 kW |
|---|---|
| Cooling | Air-cooled |
| Input Voltage | 200-240 VAC |
| Input Frequency | 50/60 Hz |
| Transmitter Type | Solid State |
| Frequency Range | 87.5 MHz to 108 MHz |
| Modulation Types | FM |
| Dimensions | Varies depending on configuration, typically around 19" rack mountable |
Step-by-step guide for mouth-to-mouth resuscitation.
Guidance on treating common injuries and shock.
Procedures for rescuing individuals from electric shock situations.
Details of the warranty coverage for the equipment.
Guidelines for site preparation, power, antenna, audio, and controls.
Initial setup procedures including unpacking, inspection, and basic connections.
Configuration of power, exciter, audio, and alarm settings.
Step-by-step process for initial transmitter setup and testing.
Procedures for specific factory-set adjustments like IPM and RF current.
Details controls and indicators on the main control/monitor panel.
Details controls and indicators on the exciter panel.
Steps for identifying and correcting operational defects and deficiencies.
Precautions for handling semiconductor devices to prevent ESD damage.
Procedures for diagnosing faults indicated by front panel alarms.
