Need help?Do you have a question about the Nautilus Hyosung MX7600I and is the answer not in the manual?
General| Brand | Nautilus Hyosung |
|---|---|
| Model | MX7600I |
| Weight | 881.8 lbs (400 kg) |
| Power Supply | AC 110-240V, 50/60Hz |
| Dimensions (W x H x D) | 23.6" x 53.1" x 32.7" (600 mm x 1350 mm x 830 mm) |
| Dimensions | 23.6" x 53.1" x 32.7" (600 mm x 1350 mm x 830 mm) |
| Operating Temperature | 32°F ~ 104°F (0°C ~ 40°C) |
Outlines the manual's objective and scope for operating the MX7600I.
Identifies the intended users of the manual.
Provides guidance on seeking help and contact information for issues.
Outlines the content covered in the manual.
Defines key terms used throughout the document.
Lists and explains abbreviations used in the manual.
Details safety guidelines for operating the equipment, including descriptions of precaution symbols.
Lists other relevant manuals and documentation.
Provides an overview of the MX7600I ATM and its benefits.
Illustrates and describes the external components and interface of the MX7600I.
Details the key features and specifications of the MX7600I system.
Describes the control electronics and its functions within the ATM.
Details the customer display, keypad, and input methods.
Lists specifications and shows an image of the cash dispenser.
Details card reader specifications and provides a sample image.
Outlines receipt printer specifications and shows a sample image.
Refers to bill conditions in the Cash Dispenser section.
Explains the function of the power supply unit.
Describes the ATM heater and its operation for temperature control.
Details safety features like body cover and locking devices.
Provides step-by-step instructions for opening the ATM's exterior door.
Details the procedure for closing the front body of the ATM.
Instructions on how to open the security enclosure door.
Provides steps to power on and off the ATM system.
Explains the LED and switch functions for power status.
Details the operation and features of the Cencon security lock.
Details electronic lock operation, combination changes, and battery warnings.
Provides guidelines to minimize environmental effects on the ATM.
Describes the overall configuration and function of the CCIM module and its sections.
Lists detailed specifications for the Cash & Check In Module.
Provides dimensions and weights for CCIM and cassettes.
Refers to bill conditions in the Cash Dispenser section.
Introduces procedures for removing jams from CCIM sections, with a location map.
Details procedures for changing the PRT maintenance module and related components.
Step-by-step guide for replacing the ink cartridge.
Explains methods for resetting the PRT Cartridge Count.
Instructions for replacing the Ink Head Cleaner Felt.
Details acceptable and unacceptable bill conditions for the dispenser.
Step-by-step guide for refilling the cash cassette.
Instructions for emptying the reject and retract boxes.
Procedures for clearing jams within the cash dispenser.
Instructions for resetting the ATM's main board.
Guides for setting cassette base and cover guides for bill sizes.
Instructions for changing the denomination label and supervisor settings.
Summarizes receipt paper specifications, printing, and handling precautions.
Step-by-step instructions for loading receipt paper into the printer.
Procedures for clearing paper jams in the receipt printer.
To Next Page
