Page 14
14. Rotate both feet to level the unit.
15. Installation is complete.
Notice: If the optional 731-
8951-XX & 731-8952 anchoring kit
is used, install it after this step.
Shim any mounting surface that
does not rest thoroughly on the
floor using flat washers, DO NOT
force the foot to contact the
ground with anchors.
Fasteners must have a minimum
of 500 lbs. tensile capacity,
be a bolt of grade 2 or better
and be installed per the bolt
manufacturer’s specifications.
Fig. 16
To Next Page
Loading...
