Page 17
Inspection
Visual inspection of your units will insure a safe environment for your clients and alert you to any issues that
may require maintenance prior to equipment failure. Proper, timely visual inspection is a critical component to
the long term care of your product.
• Fasteners, hardware and attachments should be checked monthly for looseness. Tighten as required
using appropriate tools.
• Handgrips should be checked for wear or damage monthly and replaced as needed.
• Main frame should be inspected every six months for signs of unusual wear, corrosion or structural
integrity issues.
• Upholstery should be inspected for wear or damage monthly and replaced as needed.
To Next Page
Loading...
Need help?
General
