Nautilus Be strong NS 700X User Manual

8
# Component Qty
1 Rear Base Frame 1
2 Rear Top Frame 1
3 Rear Support Upright A 1
4 Rear Support Upright B 1
10 Backing Plate 2
11 Corner Plate 1
12 Connecting Plate A 1
14 Connecting Plate C 1
15 Connecting Plate D 1
78 Hex Bolt - 3/8” x 3 1/4”L 4
79 Hex Bolt - 3/8” x 3”L 8
95 3/8” Flat Washer 24
97 3/8” Lock Nut 12
Step 1 Components: Procedure:
A. Set the Rear Base Frame (1) in a position close to the gym’s final position.
B. Attach Rear Support Upright A and B (3) (4) to Rear Base Frame (1) using the
hardware shown. Do not tighten hardware. NOTE: Rear Support Upright A (3) is
the longer piece.
C. Attach Rear Top Frame (2) to Rear Support Upright A and B (3) (4) using Backing
Plate (10) and the hardware shown. Tighten all hardware securely.
D. Attach Corner Plate (11) and Connecting Plate D (15) to the Rear Base Frame (1)
using the hardware shown. Do not tighten hardware.
E. Attach Connecting Plate A and C (12) (14) to Rear Top Frame (2) using the
hardware shown. Do not tighten hardware.
ASSEMBLY
STEP 1

Nautilus Be strong NS 700X Specifications

General

Brand	Nautilus
Model	Be strong NS 700X
Category	Home Gym
Language	English