Page 13
Lubrication
To clean and lubricate guide rods, apply TFL#50 Wet Lubricant to a clean cloth then use to wipe rods.
Do not lubricate mini-weights (S4/S8 Only)
May cause damage and will void the warranty.
Mini-Weights (95-8356)
Cleaning
Upholstery
• Keep pads free of perspiration at all times.
• Clean and disinfect upholstery at the end of each day, especially areas where perspiration and scalp oil collect.
• Clean all outside surfaces with non-abrasive, non-chlorinated household cleaners. Virahol® Disinfectant Cleaner
is an eective upholstery care product.
Painted Surfaces
• Wipe painted surfaces with a damp cloth and car wax.
• Let dry and bu with a dry cloth.
ABS Plastic Shields & Shrouds
• Clean with non-abrasive, nonchlorinated household cleaners.
• Vacuum or wipe dust from recessed areas and surfaces.
Weight Stacks
• Guide rods should be cleaned monthly with a cotton cloth prior to lubrication. It is critical to remove all old
lubricants and accumulated contaminants prior to applying lubrication.
• Internal tower and weight stack should be cleaned once every six months with a mild soap and water damp-
ened cloth to remove all dust and accumulated contaminants. Caution should be taken to not leave excess
moisture after cleaning.