MCB sw update
Description of how to
updateNG08/NG12 scoreboards
Revision: 1
Janu
ar
y 5
,
20
12
1. How to update software in scoreboard
The main board for the scoreboard is placed at the bottom of the scoreboard, where the power cable
for the scoreboard is connected.
1. First remove power from scoreboard
2. Insert SD-card with ngmcb.bin file placed in the root
3. Reconnect power to scoreboard
4. During programming the yellow LED is lid constantly, when the programming is
finished the yellow LED will start flashing
Programming is now finished, the scoreboard will display its software version in match time. The SD
card can be removed.
13
To Next Page
Loading...