Nautronic NG12 - NG12 Wireless and Console Configuration; Wireless Channel and Side Console Setup

NG12 Board Zone
SW 2.15
Documentation of
How board zone works in NG12
Revision: 1
February 13, 2014
Page 4
2.5 Wireless channel
If more than one Scoreboard System is placed in one arena or within 150 meters of each other, each Naucon-1000
unit must be configured to transmit on its own Wireless channel. This is obtained through the board zone selection,
where the wireless channel is determined by the lowest zone ON. For example if Zone 1 is ON the wireless channel is
automatically set to 1. If Zone 1 is OFF and Zone 2 is ON, the wireless channel is automatically set to 2. The table
below shows the combinations.
X: Don’t care
2.6 Multiple side consoles
If a Naucon-1000 configured as a side console is to be used with the main Naucon-1000, they need to be on the
same wireless channel, hence board zone selection must be identical for the two Naucon-1000s.
Zone 1
Zone 2
Zone 3
Zone 4
Wireless channel
ON
X
X
X
1
OFF
ON
X
X
2
OFF
OFF
ON
X
3
OFF
OFF
OFF
ON
4
35