To Next Page
J
Jason AdkinsAug 14, 2025
What to do if fuse F12 is blown in Nautronic Sports & Outdoors?
- MmonicabellAug 14, 2025
If fuse F12 is blown in your Nautronic Sports & Outdoors equipment, replace it with a new one.
What to do if fuse F12 is blown in Nautronic Sports & Outdoors?
If fuse F12 is blown in your Nautronic Sports & Outdoors equipment, replace it with a new one.
What to do if fuse F1 is blown in Nautronic Sports & Outdoors?
If fuse F1 is blown in your Nautronic Sports & Outdoors equipment, replace it with a new one.
What to do if fuse F2 is blown in Nautronic Sports & Outdoors?
If fuse F2 is blown in your Nautronic Sports & Outdoors equipment, replace it with a new one.
What to do if NG-DCF has bad reception in Nautronic Sports & Outdoors?
Check the installation of the NG-DCF in your Nautronic Sports & Outdoors equipment and ensure it has a good reception.
What to do if there is a short circuit on equipment connected to the NGMCB in Nautronic Sports & Outdoors?
Check for short circuits in the equipment connected to the NGMCB of your Nautronic Sports & Outdoors equipment.
What to do if there is an error in communication in Nautronic Sports & Outdoors?
Investigate communication errors and rectify them as needed in your Nautronic Sports & Outdoors equipment.
What to do if there are lost packets in Nautronic Sports & Outdoors?
Investigate packet loss issues and troubleshoot the equipment related to your Nautronic Sports & Outdoors product.
What to do if the radio in the Naucon-1000 is faulty in Nautronic Sports & Outdoors?
Test or replace the radio in the Naucon-1000 of your Nautronic Sports & Outdoors equipment.
What to do if the radio on the NGMCB is faulty in Nautronic Sports & Outdoors?
Test or replace the radio on the NGMCB of your Nautronic Sports & Outdoors equipment.
General| Brand | Nautronic |
|---|---|
| Model | NG12 |
| Category | Sports & Outdoors |
| Language | English |
Details wiring and RJ45 cable specifications for scoreboard setup.
Explains hardware issues by monitoring status LEDs (D1-D8) and fuses.
Diagnosing NT Control Panel issues based on power LED status (ON/OFF).
Guide to accessing Board Info and Diagnostic menus for system status.
Details the meaning of DIP settings, diagnostic information, and retry counts.
Provides a guide on using the diagnostic menu for troubleshooting system faults.
Describes service menu tests for digits/displays and test handles functionality.
Step-by-step instructions for safely removing the NGMCB from outdoor scoreboards.
Instructions for removing the cover and retaining plate of the NGMCB insert.
Steps for installing a new NGMCB and transmitting board zone setup.
Step-by-step guide for updating the scoreboard software via SD card.
Instructions on how to access and find DIP-switches within the NGI-85 power-box.
Describes how to read, set, and edit NG12 scoreboard functions via DIP-Switches.
Details DIP-switch functions and how applications are selected via DIP-Switches.
Explains how wireless channels are selected using DIP switch 2.
Describes how to set default addresses for Main Scoreboards using DIP-switches.
Explains setting default addresses for Main and Side Scoreboards via DIP-switches.
Details setting default addresses for Synchronized Shot Clocks using DIP-switches.
Instructions for setting default addresses for Stand-alone Tennis scoreboards.
Details setting default addresses for Stand-alone Squash scoreboards via DIP-switches.
Instructions for setting default addresses for Stand-alone Soccer scoreboards.
Explains how multiple scoreboards are set up and controlled by Naucon-1000.
Details standard addresses for scoreboard types and how to check them.
Guides on setting up board zones and selecting which zones the Naucon-1000 controls.
Explains wireless channel determination and setup for multiple side consoles.
Illustrates setting up and controlling 4 scoreboards separately in an arena.
Visual examples of configuring 4 scoreboards with and without sideboards/clocks.
Details how to set board zone selection for each Naucon-1000 unit.
Step-by-step instructions for replacing the horn in main scoreboards.
Detailed steps for replacing damaged digits, including DIP-setting considerations.
Explains various DIP settings for the middle section of main scoreboards with 21cm digits.
Details DIP settings for main scoreboard digits ranging from 21 to 33 cm.
Details DIP settings for configuring Home sideboards and text displays.
Details DIP settings for configuring Guest sideboards and text displays.
Explains DIP switch settings for Home and Guest team text displays.
Details recommended wiring using RS-485 and CAT5e cable for optimal signal.
Recommends daisy-chain connection and explains termination resistors.
Explains how to use repeaters to improve signal in arenas with long wires or star configurations.
Lists spare parts for NGMCB modules delivered between 2010-2012 and 2012-present.
Details spare parts for Naucon remotes, radiomodules, and batteries.
Lists spare parts for NGMCB, NGIO, NGI-85, and accessories.
Lists spare parts for Naucon-1000 accessories like wall boxes, cables, and internal components.
Provides a list of main sparepart numbers and their corresponding names.
Lists indoor spare parts for various digits and text displays with model numbers.
Lists outdoor spare parts for various digits and text displays with model numbers.
Describes the connection possibilities for the NGIO extension board for a MCB.
Explains connecting temperature sensors and using the multitimer for timer/counter functions.
Details connections for goal lamps and shot clock yellow LED strips.
Steps to access the DIP-switch in the Naucon remote for changing handle ID.
Instructions to access DIP-switches in the scoreboard's NGI-85 power module.
Guides on locating DIP-switches in Shot Clocks and Naucon-20 for PAN ID.
Details how to read and set DIP-switches for PAN ID 8 on NGI-85 and Naucon-20.
Explains setting PAN IDs 9 and 10 using DIP-switches on NGI-85 and Naucon-20.
Details setting PAN IDs 11 and 12 using DIP-switches on NGI-85 and Naucon-20.
Explains setting PAN IDs 13 and 14 using DIP-switches on NGI-85 and Naucon-20.
Details setting PAN ID 15 using DIP-switches on NGI-85 and Naucon-20.
Step-by-step guide for safely opening the scoreboard by removing screws and coverplate.
Details standard DIP settings for Main, Home Side, and Guest Side boards.
Explains DIP settings for 2-time and 4-time digits, and software versions.
Details DIP settings for standalone shot clocks and synchronized shot clocks.
