Nautronic NG12 - NG08;NG12 Horn Replacement; Procedure for Replacing the Horn

NG08 and NG12
generation.
How to replace the Horn in the
Main Scoreboards.
Revision: 1
November 8, 2012
C:\Documents and Settings\TEKNIK08.NAUTRONIC\Skrivebord\Færdigt
dokumantation af AP\Scoreboads\NG08 and NG12
HowToReplaceHorn\DOK\NG08 and NG12 HowToReplaceHorn.doc
Page 1
1. How to replace the Horn.
1. Turn off the power for the Scoreboard.
2. Dismount the screws on the right side of
the Scoreboard, and remove the metal
bracket.
3. Remove the Acryl covering the Horn.
4. Unscrew the bolt holding the Horn in place.
5. Remove the black cable from the old horn
mounted on the NGI-85.
6. Mount the new Horn with the washer and
bolt.
7. Reconnect the cable from the new Horn on
J7.
8. Reassemble the Scoreboard
9. Done.
39