Nautronic NG12 - NG12 DIP Settings for Synchronized Shot Clocks; Setting Default Addresses for Synchronized Shot Clocks

NG12 DIP Settings
Synchronized Shot Clocks
Revision: 1
February 6, 2013
Page 1
1. NG12 DIP Settings for Synchronized Shot Clocks.
This document describes how the default addresses for Synchronized Shot Clocks are set.
The black square indicates that the DIP Switch is pushed up/set to ON.
Each Shot Clock has its own address.
1.1 Synchronized Shot Clocks.
Address DIP3 DIP2 DIP1
41.
42.
43.
44.
45.
46.
47.
24