09
EN
Power Button
Power Button: Press the button to turn the scooter on, and hold the
button for 2 to 3 seconds to turn the scooter o. When the scooter is on,
press once to turn on/off the headlight and tail light, and press twice to
change riding modes.
Note: The scooter will turn o automatically when it enters standby mode
for more than 10 minutes. The standby mode means that the scooter is
being charged or not locked when it is on and not running.
4. Assembly
1. Erect the stem to a complete upright position, and
push the quick release lever inward tightly. Then open
the kickstand.
2. Press the safety lock and pull out the quick release
lever. Then turn the handlebar 90° counterclockwise and
push the quick release lever inward.
90°
1
2
3
To Next Page
Loading...
