25
EN
14. Troubleshooting
Error Codes Reasons Solutions
10 Dashboard failure
Please timely contact after-sales service for detection and repair.
11/12/28/29/40
Controller failure
14 Accelerator failure
Please check that the accelerator is returned to its position, otherwise it
cannot run normally.
Please timely contact after-sales service for detection and repair if the
accelerator wiring harness is loose or damaged.
15 Brake failure
Please check that the brake lever is returned to its position, otherwise it
cannot run normally.
If the brake lever wire becomes loose or damaged, please contact after-sales
service for inspection and repair immediately.
18 Motor failure Please timely contact after-sales service for detection and repair.
50 Battery pack over temperature
Let the scooter cool down, and do not use it until the temperature has
returned to normal.
To Next Page
Loading...
