20
EN
Inflate the Tire
Check the tire pressure every month, and inflate the
tires if the pressure is too low. The recommended tire
pressure is 45-50 psi.
WARNING! Tire removal is very complicated. Please do
not remove the tire by yourself. Improper operation
may aect the operation of the scooter. Please contact
professional support.
Adjust the Mechanical Brake
Tool: 14 mm hex key (the tool needs to be prepared by the
user).
Before adjusting, make sure the scooter is turned o and
not charging. When the brake is too tight, use the tool to
turn the nut on the screw rod counterclockwise, so as to
slightly shorten the brake cable's exposed bottom part.
When the brake is too loose, use the tool to turn the nut
on the screw rod clockwise, so as to slightly lengthen the
brake cable's exposed bottom part.
Valve Cap