22
EN
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Functions
Brake
Adjustment
Before adjusting, make sure the
scooter is turned o and not
being charged.
Tool: 14 mm hex key (the tool
needs to be prepared by the
user).
During adjusting, pull the end
of the brake cable to make the
cable tight.
Notes:
When the brake is too tight, use
the tool to turn the nut on the
screw rod counterclockwise, so
as to slightly shorten the brake
cable's exposed bottom part.
When the brake is too loose,
use the tool to turn the nut on
the screw rod clockwise, so as
to slightly lengthen the brake
cable's exposed bottom part.
√ √ √
Charging
Charge the scooter at a suitable
temperature. The indicator on
the battery charger is red when
the scooter is charging, and
turns green when the scooter
is fully charged. The control
panel will show the charging
status simultaneously during
charging.
√ √ √
Steering
Turn the handlebar 60° to the
left and right to make sure the
turning angle is correct and the
steering is free from resistance
and stagnation.
√ √
Important
Components
Battery
Assembly
Fully charge the scooter before
leaving it unused for a long
time, and turn it on to charge
every 60 days.
√
Wheels, brake pads and other vulnerable parts are worn or damaged and need to be replaced, please contact the
after-sales service in time.
To Next Page
Loading...
