What does a solid red light on Navico Network Expansion Port 2 Network Router mean?
- NNorma JonesJul 28, 2025
If the Navico Network Router shows a solid red light, a possible internal fault has occurred. The suggested solution is to see your dealer.
What does a solid red light on Navico Network Expansion Port 2 Network Router mean?
If the Navico Network Router shows a solid red light, a possible internal fault has occurred. The suggested solution is to see your dealer.
Power Supply | 12V DC |
---|---|
Operating Voltage | 12V DC |
Compatibility | Navico networks |
Function | Network expansion |
Port Type | Ethernet |
Legal statements regarding product improvement, owner responsibility, and liability.
Lists regulations the NEP-2 complies with, including FCC Part 15 and CE EN60945.
Cautions users about modifications, potential interference, and safe boating practices.
Outlines conditions for device operation related to interference.
Details warranty card provision and where to find queries.
Describes the NEP-2 as a five-port marine Ethernet switch for sharing data.
Lists all components included with the NEP-2, including part numbers.
Lists necessary tools and materials for installation, like a drill and sealant.
Guides on selecting an optimal mounting location, considering separation and environment.
Provides instructions on physically mounting the NEP-2 module and securing cables.
Advises on maintaining a minimum distance from VHF radio antennas to prevent interference.
Best practices for routing and securing cables to prevent damage and moisture ingress.
Detailed instructions on connecting the power supply, including voltage compatibility and wire functions.
Explains the function of each pin on the NEP-2 power cable.
Illustrates common configurations for powering the NEP-2 and connected displays.
Details the pinout and function for the NEP-2 Ethernet port.
Information on available Ethernet cables and adapter cables for specific uses.
A diagram showing a typical network setup with the NEP-2 and other marine electronics.
Guidance on diagnosing and resolving issues indicated by the POWER LED status.
Guidance on diagnosing and resolving issues indicated by the Ethernet LED status.
Details electrical inputs, power consumption, communication type, size, and weight.
Details environmental ratings such as waterproof, operating, and storage temperatures.
Lists the specific compliance standards the NEP-2 adheres to, like FCC and CE.
Visual representation of the NEP-2 module with key physical dimensions labeled.