| 7
About your AIS/VHF antenna splitter | NSPL-400 User Manual
Warning: This AIS/VHF antenna splitter must not be used
with Class A transceivers, Aids to Navigation transceivers or AIS
base stations.
What’s in the box?
Figure 1 shows the items included with your NSPL-400 purchase.
The following sections give a brief overview of each item. Please
ensure all items are present and if any of the items are not present
contact your dealer.
Accessory cables (x2)
Screws
(packet of 4)
Product manual
NSPL-400
Power and FM Radio cable
Product CD
Warranty
information
Warranty
information
Power and FM Radio cable
Screws
(packet of 4)
Accessory cables (x2)
Product manual
Figure 1 Items included with the product
• Product manual
The product manual is this document and should be read thor-
oughly prior to any attempt to install or use the NSPL-400.
• VHF radio connection cable
This cable is used to connect a VHF radio to the NSPL-400. The cable
has PL259 connectors at either end and requires a SO239 connector
on the VHF radio. If your VHF radio does not have a SO239 connec-
tor please contact your dealer for details of suitable adaptors.
• AIS transceiver connection cable
This cable is used to connect a Class-B AIS transceiver, such as the
NAIS-400 to the NSPL-400. The cable has a BNC connector at one
To Next Page
Loading...
Need help?
General