To Next PageTo Next PageWhy is my Navien NCB-40LDWE space heating not working?
If your Navien Boiler's space heating isn't working, first ensure the temperature setting isn't too low. Then, confirm the system has power and isn't in standby mode by checking the power connection and pressing the Power button. Note that the heating side won't function when the unit is heating domestic hot water (DHW). Finally, inspect and clean the filters on the heating side.
How to fix not hot enough water from Navien NCB-40LDWE Boiler?
If the water from your Navien Boiler's hot water tap is not hot enough, begin by checking the boiler’s temperature setting. Also, check for cross plumbing between the cold and hot water lines.
What to do if Navien NCB-40LDWE hot water is too hot?
If the water from your Navien Boiler's hot water tap is too hot, check the boiler’s temperature setting.
How to fix no water coming out of Navien Boiler?
If no water comes out when you open the hot water tap connected to your Navien Boiler, make sure that the shut–off valves on the hot and cold pipes are open.
Explains safety symbols, gas safety, and precautions for flammable materials.
Procedures for connecting the boiler to the gas supply.
Instructions for connecting power supply, room stat, and temperature sensors.
Checklist for verifying proper installation and start-up.
How to turn the boiler on/off and adjust heating and DHW temperatures.
Checklist for verifying installation compliance.
General
