To Next PageTo Next Page
Need help?Do you have a question about the Navman MULTI 3100 and is the answer not in the manual?
General| Brand | Navman |
|---|---|
| Model | MULTI 3100 |
| Category | Measuring Instruments |
| Language | English |
Choosing location and mounting for the display unit.
Performing a trial run and checking instrument functionality.
Restoring the unit to its original settings.
Explains the process of measuring water depth using ultrasonic pulses.
Explains the process of measuring boat speed using a paddlewheel.
Guidelines for cleaning the display unit and transducers.
Instructions for powering the unit on and off.
Overview of basic controls, display, and key functions.
How to select speed, depth, and temperature units.
Setting and managing depth alarms.
How to use the unit's simulation mode for practice.
How to select speed and log units (knots, km, mph).
How to reset the average speed calculation.
How to reset the maximum speed recording.
How to reset the trim speed value to zero.
Adjusting speed readings stability.
Setting the display precision for speed readings.
How to calibrate speed readings.
How to reset the trip distance log.
How to reset the total distance log.
How to select depth measurement units (meters, feet, fathoms).
How to set the maximum depth alarm.
How to set the minimum depth alarm.
Using depth alarms to set an anchor watch.
How to set the keel offset for depth readings.
How to select temperature units (°C or °F).
How to calibrate temperature readings.
How to start the countdown timer.
How to stop and reset the countdown timer.
How to set the countdown timer's start time.
Using NMEA for data output and input.
Using NavBus for instrument data sharing.
Contents of the MULTI 3100 package.
Additional components needed for installation.
