Need help?Do you have a question about the Navman MULTI 100 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Square Wave Output | Yes |
| Display | LCD |
| Measurement Functions | Resistance, Continuity, Diode Test |
| AC Voltage Range | 200V, 600V |
| DC Current Range | 200µA, 2mA, 20mA, 200mA, 10A |
| Battery Type | 9V |
Details power requirements, operating temperature, and display specifications.
Defines depth measurement range and selectable units.
Covers speed, log functions, RF interference, alarms, and transducer details.
Guidelines for selecting an optimal and safe mounting position.
Step-by-step instructions for physically installing the unit.
Instructions for connecting power, speed, depth, and NMEA transducers.
Information on connecting the M100 with other instruments or repeaters.
How to configure upper and lower display sections for various readings.
Explanation of shallow and deep water alarm activation and behavior.
Procedure for configuring shallow and deep water alarm thresholds.
Methods for changing display units for temperature (°C/°F) and depth (m/ft/fm).
Details on using the elapsed timer and count down timer features.
How to select units for speed and distance log readings.
Controls for display backlight and entering simulation mode.
Adjusting depth offset and transducer sensitivity for optimal readings.
Calibrating speed and temperature readings to match external sources or desired accuracy.
Choosing display resolution for speed (1/10th or 1/100th units).
Procedure for setting the keel offset value for depth readings.
Procedure for selecting the optimal transducer setting (1-3).
Steps to adjust the displayed water temperature reading.
Calibrating speed by comparing with another source like GPS.
Calibrating the distance log using a known distance traveled.
Troubleshooting steps for no display or problems with speed readings.
Resolving inaccurate or missing temperature and depth readings.
Addressing interference from engine and issues related to simulation mode.
To Next Page
