To Next PageTo Next Page
Need help?Do you have a question about the Navman Repeat 3100 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Display | LCD |
| Power Supply | 12V DC |
| Connectivity | NMEA 0183 |
| Mounting | Flush or Bracket |
| Alert Types | Visual and Audible |
Details the physical layout and components of the REPEAT 3100 display unit.
Instructions for cleaning and maintaining the REPEAT 3100 unit.
Instructions for powering the unit and understanding key operations.
Guide to switching between Dual, Wind, and NMEA display modes.
Configuring NMEA data display, units, and using simulate mode.
Overview of key functions and combinations for operation and setup.
Explains the NavBus system for connecting Navman instruments and data sharing.
Details NMEA 0183 standard for connecting compatible instruments.
Lists items included with the unit and necessary external components.
Information on optional accessories like NavBus junction boxes.
Important safety warnings and precautions for installation.
Step-by-step guide for mounting the REPEAT 3100 display unit.
Instructions for connecting the power and data cables to the unit.
Steps for configuring and testing the installed REPEAT 3100 unit.
Diagrams illustrating NavBus and NMEA data connections.
Guidance on parallel wiring and using junction boxes.
How to assign the unit to a backlight group for synchronized control.
Procedure to select which NMEA data sentences are displayed.
Configuring the UTC offset to display local time accurately.
Details on unit size, display, power supply, and current consumption.
Data types and sentences supported via NavBus and NMEA interfaces.
Standards compliance information and power/data cable wire mapping.
Solutions for unit power failure and display errors like dashes or fogging.
Steps to resolve erratic data, incorrect readings, or unexpected unit behavior.
Troubleshooting NMEA data not displaying or unexpected values in SIM mode.
