Need help?Do you have a question about the Navman Qube 300 and is the answer not in the manual?
General| Brand | Navman |
|---|---|
| Model | Qube 300 |
| Category | Measuring Instruments |
| Language | English |
Statement regarding compliance with FCC rules for electronic devices.
Copyright and trademark information for Navman Wireless.
Describes the Navman Wireless Qube 300 as an AVL unit for fleet vehicles.
States the manual is for professional vehicle technicians and welcomes feedback.
Lists essential tools like wire strippers, crimping tool, DMM, and Torx screwdriver.
Lists necessary supplies such as terminals, zip-ties, tape, fuses, and screws.
Details the items included in the Qube 300 installation hardware kit.
Describes an optional all-in-one antenna system for easier installations.
Shows an image of the GPS/Cellular combination antenna.
Details the Qube 300 hardware ports, connectors, and diagnostic LEDs.
Instructions on how to fit and secure the Qube 300's tamper-proof security cover.
Instructions for mounting the antenna on the windshield.
Instructions for mounting the antenna discreetly under the dashboard.
How to identify the constant power wire that always has battery voltage.
How to identify the ignition wire that has voltage when the key is on.
Details on configuring and using digital inputs for high or low voltage detection.
Steps to diagnose and resolve issues when the Qube does not power on.
Diagnosing incorrect ignition status reporting due to wiring issues.
Troubleshooting why ignition off events are not recorded, likely due to wiring.
Diagnosing frequent ignition state changes, possibly due to loose connections or wrong source.
Procedure for rebooting the M-Nav800 device.
Steps to identify faulty hardware by swapping components.
Troubleshooting power issues with the M-Nav, including common causes.
Troubleshooting communication issues with the M-Nav.
Troubleshooting problems with the Driver ID logon function.
To Next Page
