Navman Qube 300 User Manual

1 Installation and Troubleshooting Guide
28
1.12 Tamper-Evident Seal
Apply Tamper-Evident Seal paste (Torque-Seal or inspector’s lacquer) to all “Poke and Wrap”
connections, fuse holders and the ground screw. Once applied it sticks to the surface and dries
hard over 24 hours. Once hard it will crack on removal making the tampering obvious. Attach
the clear tamper-proof Security Cover with supplied T-10S security screws.

Navman Qube 300 Specifications

General

Brand	Navman
Model	Qube 300
Category	Measuring Instruments
Language	English