Navman MULTI 100 User Manual

11NAVMAN M100 User Manual
Timer Functions
All timer functions are displayed on the lower
section of the display.
Elapsed Timer
The elapsed timer will record time from power
up. Time is displayed in hours and minutes up
to 99 hours and 59 minutes.
Press the
key to show elapsed time.
DEPTH
ELAPSED
TIME
Press and hold the and keys for three
seconds while the elapsed timer displayed to
reset the elapsed time to zero.
DEPTH
3 SEC
Count Down Timer
Press the key twice to show the count down
timer. This timer counts down in seconds from a
starting value that can be set in whole minutes
from 1 to 10.
When countdown timer mode is entered the last
starting value used is displayed. To start counting
down from this value, press the
key. To select
a new value to count from, press the
key to
scroll through from 1 to 10. When the desired
value is displayed press the key to start it
counting down. The count down timer gives audio
beeps while counting down, giving 4 beeps at 4
minutes, 3 at 3 minutes, 2 at 2 minutes,1 at 1
minute, and finishing with 10 beeps. The beep at
0 seconds is a long beep.
DEPTH
DEPTH
To reset the count down timer, press and hold
the
and keys for three seconds while the
countdown timer is displayed. The display will
return to the start value selection.
INCREASE VALUE
START

Navman MULTI 100 Specifications

General

Brand	Navman
Model	MULTI 100
Category	Measuring Instruments
Language	English