NCR 7895 - Installation Procedure

To Next Page

To Previous Page

2 NCR7895 Scanner/Scale Shroud and Adapter Plate

Installation Procedure

To install the NCR 7895 Scanner/Scale Shroud and Adapter Plate, follow these steps:

1. Shut down the NCR FastLane SelfServ™ Checkout software and hardware systems.

2. Remove the Terminal Display by doing the following:

a. Remove two (2) screws that are securing the Display Mounting Bracket on the

Tower Frame.

b. Slide up the Display to disengage the mount hooks from the core.

Other manuals for NCR 7895