Need help?Do you have a question about the NCR RealScan 7875-7000 and is the answer not in the manual?
Lists the required NCR hardware components for installation.
Lists the necessary Sensormatic components for EAS functionality.
Details the required dimensions for the checkstand opening for the scanner.
Specifies the minimum clearance needed around the checkstand for maintenance.
Provides diagrams and notes for the electrical connections to the checkstand.
How to set the scale's AC voltage and frequency parameters.
Procedure for testing the scale with various weights before calibration.
Steps to locate and access the physical calibration switch.
Detailed instructions for performing the scale calibration process.
Tests to confirm the accuracy of the scale after calibration.
Instructions for sealing the calibration switch after the process is complete.
Procedure to verify the proper operation of the Sensormatic deactivation system.
To Next Page
General
