Need help?Do you have a question about the NCR 7870 and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Power Supply | 5 VDC ± 10% |
| Connectivity | RS-232, USB, Keyboard Wedge |
| Operating Temperature | 0° to 40° C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
Introduction to how programming tags alter unit operating parameters.
Details the load cell, reset, and auto-zero functions of the scale.
Outlines customer duties for site preparation and compliance.
Specifies operating, storage, and transit conditions for the unit.
Guidelines for power supply and electrical wiring at the checkstand.
Step-by-step guide for physically mounting the unit in the checkstand.
How to confirm unit functionality using diagnostics after installation.
Initial programming steps for setting parameters from factory defaults.
Method to identify the current communications protocol setting.
Setting the scale address for IBM terminals in single-cable configurations.
Comprehensive steps to calibrate the scale accurately.
Methods to confirm the calibration process was successful and accurate.
Procedures for securing the calibration switch after completion.
Steps for powering up and initiating operation of the unit.
Detailed instructions for scanning items correctly.
Step-by-step guide for using the scale function.
Introduction to the programming chapter and its sections.
Overview of the programming process, including creating and entering programs.
Detailed explanation of each programmable parameter and its settings.
Settings for selecting the communication protocol with the host terminal.
Configuration of tone parameters for successful bar code reads.
Parameters for lockout time and active time settings.
Programming options for UPC/EAN bar code reading.
Configuration of Baud Rate, Parity, Stop Bits, and Handshake for RS-232.
Configuration of BCC, Interface Control, and Check Digit for RS-232.
How scanner and scale problems are indicated through signals and codes.
Guide to diagnosing and resolving scanner operational issues.
Guide to diagnosing and resolving scale errors and operational problems.
To Next Page
