NCR 7870 - Programming Parameter Defaults

Appendix A: Programming Worksheets A-3
Programming Parameter Defaults
Programming Mode Default
Communications Protocol
Protocol
No Default
Good Read Tone
Tone On/Off
Tone Frequency
Tone Length
Tone Volume
Not-on-File Tone Volume
On
No Default
No Default
No Default
No Default
Timers
Lockout Time
Restart Lockout Timer
Active Time
900 milliseconds
Off
15 seconds
Bar Codes-1
UPC/EAN
Version D
Extend UPC-A to EAN-13
Extend UPC-E to UPC-A
Periodic Codes
Periodic Codes Extension
Send Data
Enable
None
Disable
Disable
Disable
2-Digit & 5-Digit
Data as Decoded
Bar Codes-2
Code 39
Min. Characters Allowed
Full ASCII
Check Digit Present
Transmit Check Digit
Allow 1-or-2 Character Tag
Disable
8
Disable
Disable
Disable
Disable