NCR 7870 - Checkstand Hole - Models 1000 & 2000

Chapter 3: Site Preparation 3-19
Checkstand Hole - Models 1000 & 2000
Recommended shelf to catch
NCR 7870 if dropped during
installation. The 7870 must
not be supported by this shelf.
Note: Spacers are to
position scale in hole.
They should be below
the Checkstand top.
No electronics under NCR 7870
D
C
C
A
B
E
R0119
NCR 7870-1000 Scanner
ABCDEFGH
11 5/8 in.
29.51 cm
20 1/16 in.
50.95 cm
1 3/8 in.
3.49 cm
3/8 in.
0.95 cm
17 5/16 in.
43.97 cm
1 3/8 in.
3.49 cm
5 1/8 in.
13.0 cm
6 1/4 in.
15.88 cm
C
C
B
DD
E
H
F
G
F
A
NCR 7870-2000 Scanner/Scale
ABCDEFGH
12 in.
30.48 cm
20 1/16 in.
50.95 cm
1 3/8 in.
3.49 cm
1/2 in.
1.27 cm
17 5/16 in.
43.97 cm
1 3/8 in.
3.49 cm
5 1/8 in.
13.0 cm
6 1/4 in.
15.88 cm