Need help?Do you have a question about the NCR RealScan 7837-3000 and is the answer not in the manual?
General| Scanning Technology | Contact Image Sensor (CIS) |
|---|---|
| Connectivity | USB 2.0 |
| Resolution | 600 x 600 dpi |
| Interface | USB 2.0 |
| Paper Capacity | 50 sheets |
| Operating Temperature | 50°F to 95°F (10°C to 35°C) |
| Scan Speed | Up to 30 ppm (pages per minute) |
| Output Format | PDF, JPEG, TIFF |
Identifies the intended readers of the document.
Setting unique identifiers for different terminal types.
Details connecting the base via RS-232 serial interface.
Configures audible and visual feedback for successful scans.
Defines how the scanner is activated, e.g., manual or automatic.
Programs custom sequences for barcode data output.
Explains adding data before or after scanned barcodes.
Manages delays between data elements to improve integrity.
Overview of changing scanner output using the Data Format Editor.
Allows single scans with different data formats than primary.
Lists available barcode symbologies supported by the scanner.
Configuration options for Codabar barcode reading.
Configuration options for Code 39 barcode reading.
Configuration options for Code 128 barcode reading.
Configuration options for UPC A barcode reading.
Configuration options for EAN/JAN 13 barcode reading.
Configuration options for EAN/JAN 8 barcode reading.
Maps function codes to ASCII values and CTRL+ combinations.
Lists interface key assignments across different terminal types.
Resets scanner to normal operation and re-links radio.
Restores scanner to factory default settings.
Overview of Visual Menu 2003 for scanner configuration.
Steps for downloading and installing Visual Menu 2003 software.
Explains symbols and syntax rules for serial commands.
Details characters used for querying device settings.
Serial commands to activate and deactivate the scanner trigger.
Table of menu commands, serial commands, and chapters.
Serial commands for configuring wand emulation settings.
Serial commands for configuring beep and LED outputs.
Serial commands for configuring barcode symbology options.
Technical details of the NCR 7837 scanner unit.
Technical details of the scanner base station.
Visual guides for standard cable connections.
Instructions for cleaning the scanner window and housing safely.
Steps to diagnose issues with the scanner base unit.
Steps to diagnose issues with the scanner unit.
Steps to diagnose issues with the complete cordless system.
A reference table for barcode symbologies, their IDs, and AIM IDs.
Maps decimal and hex values to ASCII characters for keyboards.
Reference for scanning programming bar codes and settings.
Detailed troubleshooting steps for base and scanner issues.
To Next Page
