NCR RealScan 7837-3000 - Multiple Symbols; No Read

3-12 Chapter 3: Output
62 code identifier for Code 39
0012 CR suffix (1) = 12
de 39, 41h = “A”
lus CR suffix (1) = 13
42 start character match for Code 128, 42h = “B”
termination string for second code
Multiple Symbo
WhenthisprogrammingselectionisturnedOn,itpermitsyoutoread
multiplesymbolswithasinglepullofthescanner’strigger.Ifyou
pressandholdthetriggerandaimingthescannerataseriesof
symbols,itreadsuniquesymbolsonce,beeping(ifturnedon)for 
read.The
scannerattemptstofindanddecodenewsymbolsaslongas
thetriggerispulled.WhenthisprogrammingselectionisturnedOff,
A - Code 39 sample length (11) plus
41 start character match for Co
FF termination string for first code
6A code identifier for Code 128
0013 B - Code 128 sample length (12) p
FF
69 code identifier for Code 93
0012 C - Code 93 sample length (11) plus CR suffix (1) = 12
43 start character match for Code 93, 43h = “C”
FF termination string for third code
ls
each
thescanneronlyreadsthesymbolclosesttotheaimingbeam.
No Read
NoReadisturnedOn,thescannersendsan“NR”tothehostif
a
With
youpullandreleasethetriggerwithoutreadingacode(forexample,
badbarcode).IfNoReadisturnedOff,the“NR”isnotsenttothe
host.