NCR RealScan 7837-3000 - Intercharacter, Interfunction, and Intermessage Delays; Intercharacter Delay

Chapter 4: Data Editiing 4-5
Interfunction, and Intermessage Delays Intercharacter,
ometerminalsdropinformation(characters)ifdatacomesthrough
quickly.Intercharacter,interfunction,andintermessagedelays
slow s ncrea taintegrity.
Eachdelayiscomposedof 5millisecondstep.Youcanprog ram upto
99steps(of5ms 0‐495ms.

Intercharacter Delay
nintercharacterdelayofupto495millisecondsmaybeplaced
thetransmissionofeachcharacterofscanneddata.Scanthe
Chartat
Prefix Scanned
Data Suffix
S
too
thetran missionofdata,i singda
a
each)forarangeof
A
between
IntercharacterDelaybarcodebelow,thenscanthenumberof
millisecondsandtheSAVEbarcodeusingtheProgramming
thebackofthismanual.


InterchacterDelay

Toremovethisdelay,scantheIntercharacterDelaybarcode,thenset
thenumberofstepsto0.ScantheSAVEbarcodeusingthe
ProgrammingChartatthebackofthismanual.

Note: IntercharacterdelaysarenotsupportedinUSBserialemulation.