NCR RealScan 7837-3000 - Reread Delay; User-Specified Reread Delay

3-6 Chapter 3: Output
ScantheHandsFreeTime‐Outbarcode,then scanthetime‐out
duration(from0‐300,000milliseconds)fromtheProgrammingChart,and
Save.Default=5,000ms.
Reread Delay
Thissetsthetimeperiodbeforethescannercanreadthesamebar
asecondtime.Settingarereaddelayprotectsagainstaccidental
rereadsofthesamebarcode.Longerdelaysareeffectiveinminim
accidentalrereadsatthePOS(pointofsale).Useshorterdelaysin
application
code
izing
swhererepetitive
barcodescanningisrequired.Default=
RereadDelayonlyworkswheninautomatictriggermode.
Medium.
Extra Long (2000 ms)
s)byscanning
digitsfromtheProgrammingChart,then scanningSave.
User-Specified Reread Delay
Ifyouwanttosetyourownlengthfortherereaddelay,scanthebar
codebelow,thensetthedelay(from0‐30,000millisecond