NCR RealScan 7837-3000 - Link Modes; Locked Link Mode; Unlinking the S Canner

Chapter 1: Getting Started 1-7
1. Providepowertothebase.

nerhassuccessfullylinkedtothebase.Ifyoureceiveatriple
theredLEDlights,thescannerhasnotlinkedtothe
Unlinking the S
atscannermustbeunlinked
beforeanewscannercanbelinked.Oncethepreviousscanneris
nlinked,itnolonger ateswithth ebase.Tounlinka
cannerfromthebase ntheUnlinkScannerbarcodebelow.
2. Placethe7837intothebase.Thescannerandbaselink.
3. Todetermineifyourcordlesssystemissetupcorrectly,scanoneof
thesamplebarcodesinthebackofthismanual.Ifthescanner
providesasinglegoodreadbeep
andthegreenLEDlights,the
scan
errorbeepand
base.
canner
Ifthebasehasascannerlinkedtoit,th
u communic
s ,sca


Link Modes
Therearetwolinkmodestoaccommodatedifferentapplications:
LockedLinkModeandOpenLinkMode.Scantheappropriatebar
theOpenLinkandLockedLinkModeexplanations
itchfromonemodetoanother.Default=LockedLink
into
youdoplaceadifferentscannerintothebase,itchargesthe
scanner,butthescannerisnotlinked.
codesincludedin
thatfollowtosw
Mode.
Locked Link Mode
IfyoulinkascannertoabaseusingtheLockedLinkMode,thisblocks
otherscannersfrombeinglinkediftheyareinadvertentlyplaced
thebase.If