NCR RealScan 7837-3000 - Other Programming Selections

5-4 Chapter 5: Data Formatting
Other Programming Selections
ClearOneDataFormat
Thisdeletesonedataformatforonesymbology.Ifyouareclearingthe
primaryformat,scan0fromtheProgrammingChart inthebackofthis
manual.Ifyouareclearinganalternateformat,scan1,2,or3,
dependingonthealternateformatyouareclearing.
Scanth eTerminal
Type(refertotheSupportedTerminalsChartinChapter2),CodeI.D.
(refertotheSymbologyChartinAppendixA),andthebarcodedata
lengthforthespecificdataformatthatyouwanttodelete.Allother
formatsremainunaffected.
SavefromtheProgrammingCharti
nthebackofthismanualThisexits,
savinganyDataFormatchanges.
DiscardfromtheProgrammingChartinthebackofthismanualThis
exitswithoutsavinganyDataFormatchanges.