2-14 Chapter 2: Terminal Interfaces
Host ACK Enable
Base/Host Escape Commands
Command Action
<ESC> a Indicate as if successful menu change made
<ESC> b Indicate as if unsuccessful menu change made
<ESC> 1
Illuminate green LED for 135 milliseconds (followed
by at least 70 mSecs. dark time when multiple
blinks)
<ESC> 2
Illuminate green LED for two seconds (followed by at
least 500 mSecs. dark time when multiple blinks)
<ESC> 3
Illuminate green LED for five seconds (followed by at
least 500 mSecs. dark time when multiple blinks)
<ESC> 4 One beep at low volume
<ESC> 5 One beep at medium volume
<ESC> 6 One beep at high volume
<ESC> 7 Indicate as successful decode and communication to
host.
<ESC> 8 Indicate as unsuccessful decode and communication
to host.
To Next Page
Loading...
