NCR RealScan 7837-3000 - Keyboard Wedge Connection; Plug and Play

Chapter 1: Getting Started 1-17
Thebestfocuspointforreadingmostcodedensitiesisabout5inches
(12.7cm)fromtheunit.Toreadsingle ormultiplesymbols(onapage
oronanobject),holdtheimageratanappropriatedistancefromthe
target,pullthetrigger,andcentertheaimingline onthe
symbol.
Resetting the Standard Prod
Ifyouarenotsurewhatprogrammingoptionsareinyourscanner, or
someoptionsandwantthefactorysettingsrestored,
andardProductDefau ltSetting sbarcodebelow.
ningthisbarcodealsocausesboththescannerandthe
basetoperformaresetandbecomeunlinked.RefertoLink ingScannerto
Baseforadditionalin form
uct Defaults
youhavechanged
scantheSt
TheMenuCommandsinChapter10liststhefactorydefaultsettingsfor
eachofthecommands(indicatedby
anasterisk(*)onthe
programmingpages).
Note: Scan
ation.

Plug and Play
fteryouscanoneofthecodes,powercyclethehostterminal
tohavetheinterfa ce ineffect.
Keyboard Wedg io
IfyouwantyoursystemprogrammedforanIBMPCATand
compatibleskeyboardwedgeinterfacewitha USAkeyboard,scanthe
barcodebelow.Keyboardwedgeisthedefaultinterface.
PlugandPlaybarcodesprovideinstantscannersetupforcommonly
usedinterfaces.
Note: A
e Connect n