NCR RealScan 7837-3000 - Beeper Duration - Good Read; LED - Good Read; Number of Beeps - Good Read

3-2 Chapter 3: Output

Beeper Duration – Good Read
Thebeeperdurationcodesmodifythelengthofthebeepthescanner
emitsonagoodread.Default=Normal.
Short Beep
LED – Good Read
TheLEDindicatorcanbeprogrammedOn orOffinresponsetoagood
read.Default=On.


Number of Beeps – Good Read
Thenumberofbeepsofagoodreadcanbeprogrammedfrom1‐9.
ThesamenumberofbeepsareappliedtothebeeperandLEDin
responsetoagoodread.Forexample,ifyouprogramthisoptionto
havefivebeeps,therearefivebeepsandfiveLEDflashes
inresponseto
agoodread.ThebeepsandLEDflashesareinsyncwithoneanother.
Tochangethenumberofbeeps,scanthebarcodebelowandthenscan
adigit(1‐9)barcodeandtheSavebarcodeintheProgrammingChart
atthebackof
thismanual.Default=One.