NCR RealScan 7837-3000 - Codabar Concatenation; Codabar Message Length

6-4 Chapter 6: Symbologies
Codabar Concatenation
Codabarsupportssymbolconcatenation.Whenyouenable
concatenation,thescannerlooksforaCodabarsymbolhavinga“D”
startcharacter,adjacenttoasymbolhavinga“D”stopcharacter.In
thiscasethetwomessagesareconcatenatedintoonewiththe“D”
charactersomitted.
Default=On.
Character Start Stop Start Stop
Codabar
SelectRequiretopreventthescannerfromdecodingasingle“D”
Codabarsymbolwithoutitscompanion.Thisselectionhasnoeffecton
CodabarsymbolswithoutStop/StartDcharacters.
Require
Codabar Message Length
Scanthebarcodesbelowtochangethemessagelength.Referto
MessageLengthonpage6‐2foradditionalinformation.Minimumand
Maximumlengths=2‐60.MinimumDefault=4,MaximumDefault=
60.
MinimumMessageLength

MaximumMessageLength
