NCR 7870 - Good Weigh Tone When Transmitting Data

7-74 Chapter 7: Programming
Good Weigh Tone When Transmitting Data
A Good Weigh tone normally sounds when an item is weighed. If the
Good Weigh Tone When Transmitting Data option is enabled the Good
Weigh tone sounds when the weight data is just starting to be
transmitted to the host terminal when using single cable RS-232
communications. The Default tag disables this option. Scan the
following programming tags to enable or disable this option. These
must be the first tags scanned after applying power to the NCR 7870.
Enable – Programming Mode, Hex 2, Hex 4, Hex 9, and Save and
Reset.
Disable – Programming Mode, Hex 2, Hex 4, Hex 8, and Save and
Reset.