NCR RealScan 7875-7000 - Connect Sensormatic Cables

NCR RealScan 7875-7000/8000 Installation Guide
06/03 AIP-00342 Release B
14 of 56
20574
Sensormatic Antenna Cable
Sensormatic Antenna
Connect Sensormatic Cables
The Sensormatic Antenna Cable and the Sensormatic Communications Cable go between the
RealScan 7875 and the ScanMax
TM
Pro Controller. Be sure to route these cables through the
cutout in the checkstand.
1. Connect the Sensormatic Antenna Cable to the Antenna connector on the ScanMax
TM
Pro
Controller.
2. Connect one end of Sensormatic Communications Cable to one of the RS-232 Peripheral
Ports on the RealScan 7875 and the other end to the POS connector on the ScanMax
TM
Pro
Controller.
20592
RealScan 7875
Sensormatic
Communications Cable
Sensormatic
Antenna
Cable
ScanMax™
Pro Controller
AC
Power
Cord
BCAN I/O POS SERVICE REMOTE ANTENNAEXPANSIONBR
MNS
PROGSTATUS