NCR RealScan 7875-7000 - Appendix B - Pan-Oston PO-2

NCR RealScan 7875-7000/8000 Installation Guide
06/03 AIP-00342 Release B
48 of 56
Appendix B – Pan-Oston PO-2
This checkstand is designed to accommodate a Sensormatic Antenna in the space to the left of
the scanner. Since this is not needed, a Sensormatic Filler Plate must be installed.
1. Install the Sensormatic Filler Plate using two screws.
2. Install a Sensormatic Power Pad Label on the Sensormatic Filler Plate. Remove the paper
backing and place the label in the middle of the Filler Plate.
3. Go to Step 2 – Connect the Components